Pressure decay method internal pressure burst tester Packaging leakage detector ASTM F1140 ASTM F2054

Pressure decay method internal pressure burst tester  measures sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. 

Pressure decay method internal pressure burst tester principle

1. Burst Test: internally pressurizes the packages until the package fails. The test pressure is the maximum pressure detected before the package fails.
2. Creep Test: Pressurize the package internally to a specific pressure and maintains this pressure for a specific time. The test measure is pass/fail.
3. Creep to Failure: The package is creep-tested and held until the package fails. The pressure setting is higher than that of the creep test to ensure the package fails in some time. The measure is the time until failure.

Pressure decay method internal pressure burst tester features

1. Three test modes of burst, creep and creep to failure are available
2. PLC programmable logic controller realizes precise pressure and time control.
3. 7 inch TFT touching screen for convenient parameter setting and test operation.
4. Multiple groups of test parameters can be save to avoid the repetitive setting time.
5. Test result auto statistics and storage.
6. Dual test methods of restraint distension and unrestraint distension
7. Program customization available.

Technical Specifications

Pressure Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard)

Inflating Head Φ4mm (Standard)

Gas Pressure 0.4 MPa~0.9 MPa

Port Size Φ6 mm PU hose

Dimensions 400 mm (L) × 270 mm (W) × 180 mm (H)

Pedestal Size 375 mm (L) × 275 mm (W) × 345 mm (H)

Power AC 220V 50Hz

Standards

ISO 11607-1, ISO 11607-2, ASTM F1140, ASTM F2054, GB/T 10440, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002